|
Here’s how you can record your pad performance
(pad events) onto the pad tracks of your song
STEP 1. Press the [RECORD]
key until you get to the PAD page of the RECORD screen.
Track Status: 
The pad track can be recorded. 
The pad track can be played.
STEP 2. Move the cursor to the track
status button, and press the [ENTER] key several times to switch
the button display to
(ready to record). You may select more than one pad track.
STEP 3. Use the track channel faders
and the [STEREO] fader to set the audio tracks to an appropriate
level for monitoring.
STEP 4. Locate the song to the
point at which you want to begin recording.
STEP 5. To begin recording on the
pad track, press the [PLAY] key. The recording will begin running,
and pad event recording will begin.
STEP 6. Play the pads while you listen
to the audio tracks play back. Pad events will be recorded on the
pad tracks. The pad events that are recorded will appear in the
pad track view in realtime.
STEP 7. To stop recording, press
the [STOP] key.
STEP 8. To play back the events that
were recorded on the pad tracks, move the cursor to the track status
button and press the [ENTER] key several times to switch the display
to
NOTES: The
pad track(s) will play back in synchronization with the recorder.
If you want to re-do the recording, repeat steps 5–8. It is
also possible to re-ecord just a specific region of a pad track.
In this case, the newly recorded pad events will overwrite the previously-recorded
events. However, you need to be careful, since this will also affect
any overlapping pad events before or after the re-recorded region. |
